Online workshops are here!

Online workshops are here!

 

Create a custom workshop! I am available for private or group classes. Learn more about blanking dies, keum-boo or forming sheet and wire. Add to your knowledge of die forming with the hydraulic press and chasing and repousse. Make custom tools to speed up your production. Develop new computer skills to help with design and prototyping. You will have the opportunity to focus on new areas of special interest or refresh your knowledge of previously learned skills. Learn in person at Jayne Redman Studio or Online at your own studio via Zoom. Send me an email at jayneredman@me.com to schedule.

National Workshops with Jayne Redman:
December 4 – 6, Making Multiples with Blanking Dies – Online Class
with Silvera Jewelry School, Berkeley, CA
www.silverajewelry.com

My new Wire and Tube Cutting Jig is here!

My new Wire and Tube Cutting Jig is here!

The Jayne Redman® Wire and Tube Cutting Jig is the perfect tool for hands free cutting of a wide range of materials and dimensions. Move the Stop up or down the 6″ Jig body and screw down the knurled knob to set the length of wire or tubing for your project. A 2mm setback in the V Channel Insert allows a smaller gauge wire to slide under the Stop and not slip up when the wire is cut. The backside of the V Channel does not have a setback. To use the flush side of the Jig, slide the Stop off the Jig and rotate so that the knurled knob is on the left. Slide the Stop back on the Jig. You will now be able to slide the Stop down the entire length of the jig to cut smaller gauge wire or tubing less than 2mm long.

Use the saw guide left or right handed by unscrewing the Thumbscrew and inserting it into the Saw Guide from the opposite end. Rotate the Saw Guide with the V Channel on top and screw the Thumbscrew into the Jig, lining up the Stabilizing Plug in the adjacent hole. Remove the Saw Guide entirely to flush cut wire.

For Hands free use screw through the beveled hole in the upper left of the Jig and into your bench top. Or remove one of the screws from the Aluminum surface of your Jayne Redman® Rotational Bench Pin. Use it to screw directly through both the beveled hole in the upper left of the Jig and the Aluminum Surface into the Rotational base.

Go to Shop Tools for more information.

Jayne Redman® Wire and Tube Cutting Jig

Jayne Redman® Wire and Tube Cutting Jig

The Jayne Redman® Wire and Tube Cutting Jig is the perfect tool for hands free measuring and cutting of a wide range of materials and dimensions. Move the Stop up or down the 6″ Jig body and screw down the knurled knob to set the length of material to be cut. A 2mm setback in the V Channel Insert allows material of a smaller gauge to slide under the Stop and not slip up when the wire is cut. The opposite side of the V Channel does not have a setback and is flush with the face. Slide the Stop off the Jig and rotate it so the knurled knob is on the left. You will now be able to cut small gauge material to less than 2mm in length. For smooth movement of the Stop, push from the center.

Use the saw guide left or right handed by unscrewing the Thumbscrew and inserting it into the Saw Guide from the opposite end. Rotate the Saw Guide with the V Channel on top and screw the Thumbscrew into the Jig, lining up the Stabilizing Plug in the adjacent hole. Remove the Saw Guide entirely to flush cut wire.

For Hands free use screw through the beveled hole in the upper left of the Jig and into your bench top. Or remove one of the screws from the Aluminum surface of your Jayne Redman® Rotational Bench Pin. Use it to screw directly through both the beveled hole in the upper left of the Jig and the Aluminum Surface into the Rotational base.

Download the Jayne Redman Wire and Tube Cutting Jig Guide

The Jayne Redman® Wire and Tube Cutting Jig can be found in the Tools Shop

2020 Workshops!

2020 Workshops!

My 2020 Calendar is here! Plan your summer vacation and come to beautiful southern Maine in August. Elizabeth Lyne will be back teaching Imagery on Die Formed Silver with me at my studio. Go to Riverview Workshops at Jayne Redman Studio to register. If my dates don’t fit with your schedule get in touch to set up a custom workshop just for you!

I will be teaching National Workshops in Texas, California, Ohio, Colorado, Missouri, Massachusetts and Maryland. Go to National Workshops with Jayne Redman to see class descriptions and to register.

Download 2020 Workshop Calendar

New Tools!

New Tools!

The Jayne Redman® Rotational Bench Pin System has two new Purple Heart Wood work surfaces – the Mini Pin and the Ring Pin. Both measure 5 inches by 3 inches and fit on all three base styles. The new Plier Stand is the main component of the Jayne Redman® Bench Accessories System. The components can be combined to create multiple stands using either Purple Heart Wood or Aluminum Legs. For more info go to the Tools page.

 

2018 Workshops!

2018 Workshops!

My 2018 Workshop Calendar is available. See where I’ll be around the country next year. Come to beautiful southern Maine for a Metalsmithing vacation! I will have three weeks of workshops this summer in my studio.
Download 2018 Calendar here: 2018-Workshop-Schedule-11-22-2018

Spring workshops are just around the corner!

Spring workshops are just around the corner!

Studio_300x200

Please join me for these inspiring workshops in the Midwest and at my own studio in Maine!

Making Multiples with Blanking Dies:

March 12 – 13, Flux Metal Arts in Mentor, Ohio www.fluxmetalarts.com/classes–workshops.html

April 1 – 3, Lillstreet Art Center in Chicago, Illinois www.lillstreet.com/class/11221

April 6 – 7, Brighton Beads and More in Brighton, Michigan http://brightonbeadsandmore.com/scheduled/making-multiples-jayne-redman-10am-2/

 

Advanced Blanking Dies – Combination Dies:

April 8 – 10, Brighton Beads and More in Brighton, Michigan http://brightonbeadsandmore.com/scheduled/making-multiples-jayne-redman-10am/

 

Workshops at Jayne Redman Studios, Westbrook, Maine:

May 9 – 10, Making Multiples with Blanking Dies https://www.jayneredmanjewelry.com/product/blanking-die-workshop/ 
May 11 – 12, Tools and Jigs for Multiples https://www.jayneredmanjewelry.com/product/tools-and-jigs-for multiples/ 
May 13 -14, Open Studio https://www.jayneredmanjewelry.com/product/open-studio/

 

 

Updated website launch!

I am thrilled to introduce the new updated JayneRedmanJewelry.com! Thank you Karen McLaughlin of KM Digital Design for creating such a beautiful site!

Visit Shop to purchase jewelry from a selection of my award winning Floraforms® Collection, find out Where to Buy from stores around the country, and go to Wholesale Purchasing to login to a retailers only section for wholesale information including the latest catalogue and pricing.

“Workshops” will give you the opportunity to view descriptions and get links to all of my National Workshops. My Riverview Workshops at Jayne Redman Studio will be available for registration and payment right on the site. Visit About the Studio for links to information about the Greater Portland, Maine area.

These are but a few of the new features of JayneRedmanJewelry.com! Enjoy exploring them all!

First Workshops of 2016!

First Workshops of 2016!

I am looking forward to starting the year again at Rio Grande teaching three of my Making Multiples Workshops: Making Multiples With Blanking Dies, Tools and Jigs for Multiples, and The Keum-boo Process! Details coming soon!

landing-page-hero

SNAG Conference 2015 in Boston, May 20 -23

SNAG Conference 2015 in Boston, May 20 -23

I will be demonstrating Blanking Dies and Tools and Jigs for Multiples at the Rio Grande Vendor Booth during the Society of North American Goldsmith’s annual conference in Boston, MA, May 20 – 23. Stop by and say hello! For Conference details visit the Events page at www.snagmetalsmith.org.

Jayne-Redman-Round-Bead-ReflectionJayne-Redman-p8